Playing a record

Lower the volume of the amplifier, active speakers, etc. sufficiently.

1. Turn on the power switch.

   

2. Use the control knob to select the speed.

   • Select “33” for a 33-1/3 RPM record and “45” for a 45 RPM record.

   The platter begins spinning.

3. Raise the tonearm by lifting the tonearm lift control lever to the UP position.

   

   1. Tonearm lift control lever

4. Position the tonearm over the desired location (groove) on the record.

   

5. Lower the tonearm by moving the tonearm lift control lever to the DOWN position.

   • Alternatively, you can skip steps 3 and 4, and use your fingers to lift the headshell, move the tonearm over the desired location on the record, and then place the headshell down to begin playing the record.
   • Do not subject the product to strong impact during playback.

   The tonearm descends slowly onto the record and play begins.