Manual operation

Lower the volume of the amplifier, active speakers, etc. sufficiently.

1. Raise the tonearm by lifting the tonearm lift control lever to the UP position.

   

   1. Tonearm lift control lever

2. Position the tonearm over the desired location (groove) on the record.

   

3. Slowly lower the tonearm by moving the tonearm lift control lever to the DOWN position.

   • Alternatively, you can skip steps 1 and 2, and use your fingers to lift the tonearm and move it over the desired location on the record, and then slowly place the tonearm down to begin playing the record.
   • Lower the tonearm slowly so that it does not drop. Doing so could damage the stylus tip.
   • Do not subject the product to strong impact during playback.
   • Do not switch the record size selection while the record is playing. Doing so can cause the product to malfunction.

   The tonearm descends slowly onto the record and play begins.