Stopping the record

Once the record has played through to the end, the tonearm will automatically return to the tonearm rest. To stop a record that is currently playing, perform the following.

  • The tonearm may not automatically return to the tonearm rest with some records.

  1. Lower the volume of the amplifier, active speakers, etc. sufficiently.

  2. Press the STOP button.

    • Once the record stops playing, the tonearm will automatically return to the tonearm rest.

  3. Remove the record after the platter has come to a complete stop.

  4. Close the tonearm rest clamp.

    • Make sure the tonearm lift control lever is lowered before closing the tonearm rest clamp.

  5. Attach the protector.

  • When the tonearm reaches the end (center) of the record, it will automatically lift and return to the tonearm rest. Do not interfere with its motion. Doing so can cause the product to malfunction. If the tonearm does not lift and return to the tonearm rest, press the STOP button to complete this operation.
  • If the felt mat gets dirty, it can easily scratch the record, so remove the felt mat periodically and wipe off any dust.
  • To prevent the record from becoming scratched or warped, remove it after use.
  • Do not use a disk stabilizer.
  • Do not use a platter other than the one provided.
  • This product is not intended for DJs. Do not touch the record or the platter while the record is playing. Do not operate the product in any way that may damage the stylus, such as scratching (rubbing the record on the turntable by hand to produce sound).
  • Do not apply lateral force to the stylus while it is on the record. Doing so could damage, chip, or break the stylus tip. The record could also be damaged.