Pairing a Bluetooth device

  • Read the user manual for the Bluetooth device.
  • Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
  • Note that Audio-Technica cannot guarantee the operation of connected Bluetooth devices.

  1. Plug the AC adapter into an outlet.

    • This product does not have a power switch. A standby current is always running through the product, even when it is not being used; disconnect the AC adapter from the outlet when not using the product for a long period of time.
    • Plug the AC adapter into an outlet without removing the replacement stylus protector. If the platter has rotated, press the STOP button without touching the tonearm, and then wait until the tonearm returns to its original position.
    • If you play a record immediately after plugging the AC adapter into an outlet, the sound that is played may be garbled. Wait a short time (about 30 seconds) after plugging the AC adapter into the outlet before playing a record.

  2. Set the pre-amplifier selector switch to the LINE side.

  3. Set the Bluetooth device (a Bluetooth-supporting device such as headphones or speakers) to the pairing mode.

  4. Press and hold the Bluetooth connect button (for about 2 seconds).

    • The Bluetooth indicator lamp will start flashing red and blue.

    1. Bluetooth connect button

  5. Once paired, the Bluetooth indicator lamp will light in blue.

  • The product’s pairing mode will automatically end after a certain period of time (about 120 seconds). If pairing cannot be completed in that time, try pairing again using the same procedure.