Headphones
- Remove the eartips when cleaning the headphones.
- The headphones may not function properly if they become wet. Wipe the headphones with a dry cloth, shake them multiple times to remove any excess water, and allow the headphones to dry thoroughly before use.
- Natural oils from the skin are particularly likely to build up on the eartip attachment parts (see figure). If these areas are not cleaned, the eartips can become detached. Clean them regularly. Do not touch the areas where sound is produced as they are delicate. Doing so may result in malfunction.
-
Remove the eartips and wash the headphones with water.
- Do not use soapy water. Wash in fresh water at normal temperature (10 to 35°C (50 to 95°F)) or a gentle flow of tap water.
- When washing, take care to prevent water from spraying directly onto the sound reproduction part, microphone, or vent.
- Do not wash with a brush or sponge. Wash by hand.
- Sound reproduction part
- Eartip attachment part
- Vent
- Microphone
-
After washing, wipe any surface moisture thoroughly with a dry, clean, and soft cloth.
-
Hold the headphone firmly, press it against a dry cloth, and then shake it until no more water droplets come off.
- Although the headphones have a waterproof rating equivalent to IPX5, the sound reproduction parts and microphones are not water resistant. If any water enters the interior of the headphones, no sound will be reproduced, or sounds may be difficult to hear. In such cases, press the headphone against a dry cloth, and then shake it approximately 20 times with the sound reproduction part and microphone positioned downward.
-
Wipe off any water that remains in the gap between the sound reproduction part and the microphone by gently pressing the headphones against a dry, clean, and soft cloth.
- Do not wipe off any water in the gap with a cotton swab, etc.
|
|
|---|