Pairing a Bluetooth device

• Read the user manual for the Bluetooth device.
• Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
• Wear the product to hear voice guidance during pairing.

1. Remove the headphones (L (left) and R (right)) from the charging case.

   

2. Separate the left (L) and right (R) side headphones.

   • The indicator lamps on the headphones will light in white, and then flash.

   

3. Use your Bluetooth device to begin the pairing process and search for the product. When your Bluetooth device finds the product, “ATH-CKS50TW2” will be displayed on the device.

   • For information about using your Bluetooth device, refer to the device’s user manual.

4. Select “ATH-CKS50TW2” to pair the product and your Bluetooth device.

   • Some devices may ask for a passkey. In this case, enter “0000”. The passkey may also be called a passcode, PIN code, PIN number, or password.

   

   The voice guidance will play the message “Connected”, and the headphone indicator lamps will turn off. This indicates pairing was performed correctly and is now complete.