Pairing a Bluetooth device

• Read the user manual for the Bluetooth device.
• Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
• Wear the product to hear voice guidance during pairing.

1. Starting with the product turned off, turn it on.

   • The indicator lamp will light in white, and then flash in white.

2. Use your Bluetooth device to begin the pairing process and search for the product. When your Bluetooth device finds the product, “ATH-M20xBT” will be displayed on the device.

   • For information about using your Bluetooth device, refer to the device’s user manual.

3. Select “ATH-M20xBT” to pair the product and your Bluetooth device.

   • Some devices may ask for a passkey. In this case, enter “0000”. The passkey may also be called a passcode, PIN code, PIN number, or password.

   

   The voice guidance will play the message “Bluetooth connected”, and the indicator lamp will flash slowly in white. This indicates pairing was successfully completed.

Pairing with Fast Pair

In one touch, the product enables quick, effortless Bluetooth pairing with your Android devices. You can even check to see where you last placed it.

1. Turn on the Bluetooth function on an Android device configured with a Google account.

2. Turn on the product and bring the product close to the Android device.

   • For information about using your Bluetooth device, refer to the device’s user manual.

3. Touch the pairing notification that appears on your Android device.

   The voice guidance will play the message “Bluetooth connected” when pairing is complete. The indicator lamp will begin flashing slowly in white.