Pairing a Bluetooth device

  • Read the user manual for the Bluetooth device.
  • Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
  • Wear the headphones to hear voice guidance during pairing.

  1. Remove the headphones (L (left) and R (right)) from the charging case.

    • The indicator lamps will light in white, and then flash. (Depending on the order the L (left) and R (right) side headphones are removed from the charging case, the indicator lamp on one side will flash white quickly, and the other will flash white slowly.)

  2. Use your Bluetooth device to begin the pairing process and search for the product. When your Bluetooth device finds the product, “ATH-SQ1TW” will be displayed on the device.

    • For information about using your Bluetooth device, refer to the device’s user manual.

  3. Select “ATH-SQ1TW” to pair the product and your Bluetooth device.

    • Some devices may ask for a passkey. In this case, enter “0000”. The passkey may also be called a passcode, PIN code, PIN number, or password.

    The voice guidance will play the message “Bluetooth connected” when pairing is complete. The indicator lamps will begin flashing slowly in white.

Pairing with Fast Pair

In one touch, the product enables quick, effortless Bluetooth pairing with your Android devices. You can even check to see where you last placed it.

  1. Turn on the Bluetooth function on an Android device configured with a Google account.

  2. Remove the headphones (L (left) and R (right)) from the charging case and bring them close to the Android device.

    • Be sure to remove both headphones (L (left) and R (right)) from the charging case. No notification will appear on the Android device if only one headphone is removed.

  3. Touch the pairing notification that appears on your Android device.

    The voice guidance will play the message “Bluetooth connected” when pairing is complete. The indicator lamps will begin flashing slowly in white.