Auto mix settings for connecting multiple units (ATND1061LK)

Auto mix can be performed with multiple ATND1061LK units as a single microphone group. Follow steps 1 to 5 in Digital Microphone Manager settings of “Auto mix settings for connecting multiple units (ATND1061DAN)” to perform settings for the ATND1061LK.

Gain sharing

When using multiple ATND1061LK units, gain is shared within the areas inside the dotted lines in the figure. The gain sharing functions of the LINK A port and LINK B port of the ATDM series mixer are independent, while the gain sharing functions of the ATND1061LK units connected to each port operate in unison.