Wiring table
- Microphone output is low impedance (Lo-Z), balanced type. Signals are output on each pair of Euroblock connectors on the RJ45 breakout cables. Audio grounding is achieved with a shielded connection. The output of each Euroblock connector is as shown in the pin assignment.
- MIC 1 is “O” (omnidirectional) and MIC 2 is “L” (bidirectional), with both positioned at 240° horizontally. MIC 3 is “R” (bidirectional), and is positioned at 120° horizontally. These are combined to create a directional pattern in any desired direction.
- The pin number sequence of the output terminals is as follows.
OUT A
The pin numbers and functions of the RJ45 connectors and the colors of the RJ45 breakout cables are as follows.
| Pin No. / Function | Cable color |
|---|---|
| PIN 1 / MIC 2 L (+) | Brown |
| PIN 2 / MIC 2 L (-) | Orange |
| PIN 3 / MIC 3 R (+) | Green |
| PIN 4 / MIC 1 O (-) | White |
| PIN 5 / MIC 1 O (+) | Red |
| PIN 6 / MIC 3 R (-) | Blue |
| PIN 7 / GND | Black |
| PIN 8 / GND | Black |
OUT B
The pin numbers and functions of the RJ45 connectors and the colors of the RJ45 breakout cables are as follows.
| Pin No. / Function | Cable color |
|---|---|
| PIN 1 / Blank | - |
| PIN 2 / Blank | - |
| PIN 3 / LED | Green |
| PIN 4 / Blank | - |
| PIN 5 / CLOSURE | Red |
| PIN 6 / Blank | - |
| PIN 7 / GND | Black |
| PIN 8 / GND | Black |