How to link a receiver and transmitter

1. Remove the transmitter from the charging station.

2. Press and hold the power button on the transmitter (the PUSH button for the ESW-T4101) for approximately 2 seconds, and then release the button.

   • If you insert a transmitter that is on into the charging station, the transmitter will automatically turn on when you remove it from the charging station.
   • If you turn the transmitter on immediately after removing it from the charging station, it may take some time (approximately 5 seconds) before the transmitter starts.

   The transmitter turns on and automatically searches for the link destination. When the link is established, the link indicator lamp on the receiver and the status indicator lamp on the transmitter light.