Default value lists
ESW-R4180LK
| Category | Item name | Default value | |
|---|---|---|---|
| System | Device ID | 0 | |
| Device Name | BLANK | ||
| Location | BLANK | ||
| Channel Name | Ch1 | CH 1 | |
| Ch2 | CH 2 | ||
| Ch3 | CH 3 | ||
| Ch4 | CH 4 | ||
| Ch5 | CH 5 | ||
| Ch6 | CH 6 | ||
| Ch7 | CH 7 | ||
| Ch8 | CH 8 | ||
| RF Mode | Standard | ||
| RF Power | Mid | ||
| LED | ON | ||
| Preset Recall LINK | OFF | ||
| Audio | Channel Volume | 0 dB | |
| High-pass Filter | OFF | ||
| Meter Setting | Post | ||
| Network | Remote Control | Level Notification | ON |
| Syslog | OFF | ||
ESW-R4180DAN
| Category | Item name | Default value | |
|---|---|---|---|
| System | Device ID | 0 | |
| Device Name | BLANK | ||
| Location | BLANK | ||
| Channel Name | Ch1 | CH 1 | |
| Ch2 | CH 2 | ||
| Ch3 | CH 3 | ||
| Ch4 | CH 4 | ||
| Ch5 | CH 5 | ||
| Ch6 | CH 6 | ||
| Ch7 | CH 7 | ||
| Ch8 | CH 8 | ||
| Roaming | OFF | ||
| Roaming Threshold | −85 dB[1] | ||
| RF Mode | Standard | ||
| RF Power | Mid | ||
| LED | ON | ||
| Audio | Channel Volume | 0 dB | |
| High-pass Filter | OFF | ||
| Meter Setting | Post | ||
| Network | IP Setting | Mode | Auto |
| IP Address | 192.168.0.20[2] | ||
| Subnet Mask | 255.255.255.0[2] | ||
| Gateway Address | 192.168.0.1[2] | ||
| Remote Control | Level Notification | ON | |
| Multicast Address | 239.0.0.100 | ||
| Multicast Address Port Number | 17000 | ||
| Syslog | OFF | ||
| NTP Setting | Enable | OFF | |
| Server Address | 192.168.0.40[3] | ||
| Port Number | 123[3] | ||
| Time Zone | 00:00[3] | ||
| Daylight Saving Time | OFF[3] | ||
| Dante | Dante IP Setting | Port Mode | Single Cable |
| IP Mode | Auto | ||
[1] This is the default value when “Roaming” is set to “ON”.
[2] This is the default value when “Mode” under “IP Setting” is set to “Static”.
[3] This is the default value when “Enable” under “NTP Setting” is set to “ON”.
ESW-T4101
| Category | Item name | Default value | |
|---|---|---|---|
| System | Device ID | 0 | |
| Device Name | BLANK | ||
| Location | BLANK | ||
| Gain | External Microphone | 0 dB | |
| Internal Microphone | 0 dB | ||
| Mute | Enable | ||
| Battery Alert | OFF | ||
ESW-T4102
| Category | Item name | Default value | |
|---|---|---|---|
| System | Device ID | 0 | |
| Device Name | BLANK | ||
| Location | BLANK | ||
| Gain | 0 dB | ||
| Mute | Enable | ||
| Battery Alert | OFF | ||
ESW-T4106
| Category | Item name | Default value | |
|---|---|---|---|
| System | Device ID | 0 | |
| Device Name | BLANK | ||
| Location | BLANK | ||
| Gain | 0 dB | ||
| Polar Pattern | Cardioid | ||
| Battery Alert | OFF | ||
| Mute | Mute functionality | Enable | |
| Mute Mode | Toggle | ||
| Default Mute Setting(Toggle) | Default Unmute | ||
| Mute LED Color | Red | ||
| Unmute LED Color | Green | ||
ESW-T4107
| Category | Item name | Default value | |
|---|---|---|---|
| System | Device ID | 0 | |
| Device Name | BLANK | ||
| Location | BLANK | ||
| Gain | 0 dB | ||
| Battery Alert | OFF | ||
| Mute | Mute functionality | Enable | |
| Mute Mode | Toggle | ||
| Default Mute Setting(Toggle) | Default Unmute | ||
| Mute LED Color | Red | ||
| Unmute LED Color | Green | ||
ESW-CHG4/ESW-CHG5
| Category | Item name | Default value | |
|---|---|---|---|
| System | Device ID | 0 | |
| Device Name | BLANK | ||
| Location | BLANK | ||
| LED | ON | ||
| Link Button | Enable | ||
| Network | IP Setting | Mode | Auto |
| IP Address | 192.168.0.20[1] | ||
| Subnet Mask | 255.255.255.0[1] | ||
| Gateway Address | 192.168.0.1[1] | ||
| Remote Control | Multicast Address | 239.0.0.100 | |
| Multicast Address Port Number | 17000 | ||
| Syslog | OFF | ||
| NTP Setting | Enable | OFF | |
| Server Address | 192.168.0.40[2] | ||
| Port Number | 123[2] | ||
| Time Zone | 00:00[2] | ||
| Daylight Saving Time | OFF[2] | ||
[1] This is the default value when “Mode” under “IP Setting” is set to “Static”.
[2] This is the default value when “Enable” under “NTP Setting” is set to “ON”.