Preparation for Web Remote

Connecting the microphone with the control device

1. Connect the control device with the microphone via a wired or wireless connection.

2. Perform network settings for the control device and connect to the network.

	The microphone ships from the factory with “IP Config Mode” set to “Auto”. To connect using a static IP address, set “IP Config Mode” to “Static”.

Setting up Locate

1. Download the Locate installer and application to the control device.

   • The installer can be downloaded from the Audio-Technica website (https://www.audio-technica.com/) for the country or region where used.

2. Double-click the downloaded setup.exe.

   The setup wizard will appear.

3. Follow the on-screen instructions to install Locate.

   Once installed, a Locate icon will appear on the desktop.

4. Confirm that the microphone is connected to the same network as the control device before double-clicking on the Locate icon.

   Launch Locate. Microphones connected to the network are detected automatically.

5. Select the microphone to perform Web Remote control and click “Open”.

   The Setting & Maintenance screen will appear.

	The “Identify” function is not available in Locate. Use Digital Microphone Manager for identifying connected microphones.