How to pair devices

In this user manual, making a receiver and transmitter register each other is referred to as a “pairing”.

1. Set the receiver to pairing mode.

   • Refer to Pairing mode for details.

   “Pairing” appears on the display of the receiver.

2. With the transmitter off, press and hold (approximately 5 seconds) the power button.

3. When the indicator lamp of the transmitter flashes alternately between green and red, release this button.

   “Pairing” appears on the display of the transmitter.

4. When pairing is complete, a completion screen appears on the display of the receiver.

   The indicator lamp on the transmitter stops flashing and remains lit.

	If the transmitter firmware is old, a message prompting you to update it will appear on the receiver. If this message appears, refer to How to update the firmware and update the firmware.